Universal Serial Bus
The universal serial bus commonly referred to as USB is a computer cable that connects peripheral devices such as digital cameras, external hard drives, flash disks, scanners and so on that are USB enabled with host controller’s like a personal computer or a lap top. USB specification also defines as male and female to represent the receptacle. They fundamentally make it easy to connect external devices to computer devices replacing multitude connectors that may have been used by the computer system for simplicity in terms of software and hardware connection permission and integration of the same while in use.
Unshielded Twister Pair
The unshielded twister pair is commonly used for networking and in real sense they are called twister because they are twisted in nature. This twist is to prevent them from electromagnetic interference from outside sources or another wire pairs proximity to them. Twister cables are commonly divided into two classification Shielded Twister Pair (STP) that are used in high end for resistance since they have an extra shielding layer and the other is Unshielded Twister Pair (UTP) that has lower specification to it in terms of resistance.
Fibre optic cables
Fibre optic cables are made of a thin cylinder layer of glass surrounded by multiple layer of coating for protection, unlike other cables they transmit data through pulse of light this makes them extremely fast in high traffic environment. Fibre optic cables are divided into two types. Single mode fibre that allows for transmission of data over long distance using single ray of light and multi-mode fibre that carries data over a short distance by using several rays of light at the same time.
Coaxial cables draw their name from the inner conductor and the outside shield having a common geometric axis. They conduct electric signals using an inner solid from copper wire surrounded by a shield The coaxial can be bent and twisted and strapped without affecting the real time transmission process. They are commonly used in television signals. They are restricted to the dielectric with little leakage outside the shield.
Patch cable is an electrical or optical cable use to connect a patch in from one electronic or optical device to another for signal routing. They use a shielded core through which they are attached by each end of the connectors for plug in and function. Such cables include modular Ethernet cables and they differ in colours and forms for their specific and defined use. They are however short and mostly not longer than two meters.
Power lines can be used for networking through power line communication where electric wires are used to simultaneously carry both data and electric power to inter connect computers where a standard high speed power line communication over phone lines and coaxial wiring. It also applies and is used for broadband power lines, however multiple technologies are required to apply this as typical transformers prevent propagating the signals and interference.
As you can see, there are many different types of cabling required for building a network. It is important to buy high quality cable so that the network is reliable and efficient, check out the range on offer from https://www.cableintelligence.co.uk. You can get whatever you need to build a top quality network that will last for years.